Hatchery accessories
Egg room coolers and humidifiers
Hatching eggs are ideally stored at an
ambient humidity of 75 to 80% and at
a temperature between 12 and 18°C
(depending on the duration of storage).
Petersime delivers and installs egg room coolers and humidifiers that protect the dormant embryo, giving precise temperature control, proper air circulation and no dehydration!
Different humidifier capacities are available according to room size. Steam humidifiers are also available.

Egg room cooler Pulverisation humidifier
Petersime delivers and installs egg room coolers and humidifiers that protect the dormant embryo, giving precise temperature control, proper air circulation and no dehydration!
Different humidifier capacities are available according to room size. Steam humidifiers are also available.

Egg room cooler Pulverisation humidifier
On-farm traying with Petersime setter trays and trolleys
Setting the eggs directly into the setter
trays at the parent stock farm offers distinct
advantages: » Fewer damaged or broken eggs because handling is
» reduced
» Significant labour savings
The Petersime setter trolley is ideal for transporting hatching eggs from the farm to the hatchery. The large rubber wheels are shock-absorbent. During transport, the trays are automatically locked in the horizontal position.
Egg store turning system
Hatching eggs that are stored for more
than five days benefit from regular turning
during storage.
Petersime has designed automatic trolley
turning systems of various capacities to
suit all sizes of egg holding rooms.
Vacuum egg lifter
The advantages of egg traying with a
vacuum lifter are:» It saves labour
» Fewer eggs get cracked or broken
» The eggs are not touched by hand
The complete assembly, including vacuum pump, is available with one or two egg lifters for one or two operators respectively.
Fumigation room equipment
More than ever, stringent hygiene procedures
are essential in all hatcheries.
Fumigation of hatching eggs, setter trolleys
and trays prior to setting the eggs, is
one of the most effective ways of removing
bacterial contamination before it has
the chance to spread within the incubators.The fumigation room equipment delivered and installed by Petersime is designed for accurate and safe fumigation.
It is fully automatic, timer controlled and easy to use. At the end of the fumigation cycle, any fumes remaining are automatically evacuated before the green light is given to go into the room. Each system is sized exactly to the specific size of your hatchery.
Candling table and transfer table
Designed for small and medium sized
hatcheries for manual candling and for
transferring 150 chicken eggs at one time.
Also available as a candling frame or transfer
frame (without the trolley).
PTM - PCM
PTM
PCM
Two operators can transfer up to 40,000
hatching eggs per hour with the semiautomatic
PTM (Petersime Transferring
Machine). The actual capacity varies with
the speed of the operators. In addition
to the savings in labour, significant quality
improvements will be achieved as
hairline cracks in the shells of the eggs
are eliminated. This results in consistently
improved hatchability. The standard version
is designed for Petersime plastic trays.
Modifications for other types or makes are
optional.The PCM (Petersime Candling Machine) is an optional candling unit for use with the PTM.
The PTM and PCM are mounted on wheels for mobility. Both are made of stainless steel for durability and optimum hygiene.
Control panel
Check all of your incubators at a glance
with the Petersime Control Panel. This
easy-to-operate control panel monitors up
to 95 setters or hatchers. It continuously
displays their operating or alarm status.
The Petersime Control Panel is also capable
of controlling other equipment such
as non-Petersime incubators, air handling
units, water chillers, etc. (any alarm input
between 10 and 30 VDC).The alarm panel is powered independently to protect the hatchery against power failure.
Strongly recommended for every hatchery!
Water chiller
In many climates where cool water is not
available, a water chiller is needed to produce
chilled water.The chilled water is used for cooling setters and hatchers and/or for supplying cold water to the air handling units within the hatchery.
The specialists within Petersime's Project Department will advise you on your specific hatchery project and the chiller capacity required.
Petersime has a comprehensive range of water chiller systems, designed and delivered complete with water tank, pumps and full technical documentation.
Stand-by generator
No hatchery should be without one.
Don't put your eggs or chicks at risk.
Petersime's Project Department can determine
the exact generator capacity for your
hatchery.
Tray washers
Increase your hygiene and efficiency with
Petersime's automatic tray washers.
Swift cleaning of setter and hatcher trays
as well as chick boxes. Different capacities
up to 450 trays per hour.For fast drying, blow-off units installed inline with the washer are also available.
Mobile high-pressure washers
Mobile high-pressure washers are very
handy tools for cleaning and disinfecting
incubators, floors and walls.
Individual Automatic Disinfection System
Petersime's Automatic Disinfection System
was specially developed for the timely,
accurate and labour-saving disinfection of
incubators.Any non-corrosive liquid disinfectant, either diluted (e.g. 40% Formalin solution) or undiluted (100%) can be sprayed into the incubator through the humidifying nozzle within the incubator. In incubators with a plastic disc humidity system, an atomising nozzle needs to be installed. The viscosity of the disinfectant should be similar to that of water.
Advantages:
» Consistently lower bacterial counts compared with the same disinfectant applied
» through an evaporative pan
» Uniformity of disinfection
» Perfect dosage and environment-friendly usage
» Absolutely safe to the hatchery staff
» (no need to pour disinfectant into a pan in each incubator)
» Labour saving
Petersime's Automatic Disinfection System is optional on all Petersime incubators.